Microscope Lamps and Accessories
Electron Microscopy Sciences EMS Platinum Aperture with 70 µm hole, 0.24 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 70 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 30-20-20-70 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 30-20-20-70 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences Tripod Polisher PrecISIon Locking Micrometer
Special larger diameter locking rings for easy locking and are graduated in one micron increments with 13mm travel. Non-coating Micrometers not recommended. - For use with Tripod Polisher.
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-30-50-70 µm holes, 45.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-30-50-70 µm
Dimensions: 45.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 20-20-30-30 µm holes, 45.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 20-20-30-30 µm
Dimensions: 45.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences Tripod Polisher Derlin Micrometer Fee
The Delrin Feet are applied to the tip of each micrometer and are designed to protect the micrometer as well as the lapping from damage when polishing TEM samples. For use with Tripod Polisher Model 590.
Electron Microscopy Sciences Tripod Polisher Micrometer Base
Holds the micrometer and has two captive screws that hold the L-Brackets or the Parallel Polishing Mount in position when polishing. For use with Tripod Polisher Model 590.
Electron Microscopy Sciences EMS Platinum Aperture with 60 µm hole, 0.12 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 60 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 70-70-50-50m, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 70-70-50-50m
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences EMS Gold Aperture with 200 µm hole, 3 mm O.D., 0.12 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 200 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Gold Aperture with 100 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 100 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Strip Aperture Hitachi, 10-50-100-200 µm holes, 41.0 x 4.0 x 0.10 mm
Strip apertures made from Platinum-Iridium (95:5).
Holes: 10-50-100-200 µm
Dimensions: 41.0 x 4.0 x 0.10 mm
Electron Microscopy Sciences Tripod Polisher Parallel Polishing Mount Stainless Steel
Parallel Polishing Mount (S. Steel) - For use with Tripod Polisher Model 590.
Electron Microscopy Sciences EMS Gold Aperture with 40 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 40 µm
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Gold Aperture with 150 µm hole, 3 mm O.D., 0.24 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 150 µm
O.D.: 3 mm
Thickness: 0.24 mm